Using Evaporative Coolers Can Help You Cool Your Home

Evaporative coolers are the most economical way of cooling your home especially if you live in a hot and dry area. These coolers are similar to the first generation air conditioning units. Earlier, air conditioners were used to blow air across the top of the ice. This helped cool air enter the room and the hot air escaped through the vents. mccoy cooler  Contemporary evaporative coolers use similar technique to cool your home without increasing your electric bills.

Usually all evaporative coolers use electricity to run a fan and water pump to cool your home. These coolers are effective in areas where the air is arid. There are several models of evaporative coolers available in the market. Some coolers can be attached to the roof top while others can be fixed on the wall. These coolers have vents that bring the air in and a duct that distributes cool air into the house. The cooler pads on each vented sides are about 2 to 3 inches thick and 3 feet long. These pads are made of a fiber that can hold water.

The main drawback of getting these cooler is that they can only be used in dry areas. Since these coolers are depend on hot dry air to cool the rooms their effectiveness is reduced when you use them in humid areas. If you use these coolers in moist areas, the machine will pull wet air from the atmosphere and blow it into your home. Also, if you use the cooler when the outside atmosphere is moist, the pads in the cooler will start stinking. The fan of the cooler will blow this smell into your home. So it is best that you avoid using evaporative coolers during rainy season when there is excess moisture in the air.

If you have installed an evaporative cooler in your home, it is important that learn carry out routine maintenance of the machine. Getting a professional to carry out maintenance of the machine can be expensive. If you want to reduce your expenses, it is a good idea to check the condition of a few important parts of your cooler at least once a month. Some of the parts that you need to check include the pads and the condition of the bearing and the pipe.If you find that there is a major problem in your cooler, it is best that you get professional help to repair your cooler.

Leave a Reply

Your email address will not be published.